Barrel Roof Tile
The barrel roof tiles of Verea are the result of a process of research and design aimed at achieving a product with exceptional resistance to the passage of time.
Why choose them?
A curved tile is one of the most sought-after materials for roofing or sloped coverings. It features a curved surface with a consistent thickness throughout the piece. If desired, we offer various sizes of Verea curved tiles so you can choose the one that best suits your needs.
Durability
Finishes
Warranty
length*
Wide mouth
Stretchy mouth
units / m² (1)
units / m² (2)
Unit / sq
Weight/unit
units/pallet
units / ml
Weight/pallet
Minimum slope following CTE
Red
Brown
Brown**
Graphite
Graphite**
Ohio red
Ohio red**
Peach
Peach**
Vintage
Vintage**
Jacobea
Masia
Ribeira sacra
Añeja
Añeja**
Fumé
Fumé**
Capcana
Capcana**
Santiago
Santiago**
Red
(1) Calculated for placement on corrugated board and overlap of 7 cm.
(2) Calculated with an overlap of 12 cm. The same number of 50×21 cover tiles is required. Maximum allowed overlap: 13.5 cm.
* Regulatory tolerance of ± 2%
** Only available with a hole for screwing.
Due to the nature of the ceramic material, variations in tone may occur. Images are for reference only and the final colour may differ from that shown.
Special Pieces
Under Ridge & HIP
Piece that fills the gap under the ridge tile. It is also used to resolve the ends against a vertical wall at the top of the skirt.
Under Ridge & HIPPiece that fills the gap under the ridge tile. It is also used to resolve the ends against a vertical wall at the top of the skirt.
Hip-ridge & rakeRoof tile that ensures watertightness along the hips and ridge line.
Ridge EndPiece designed to finish off the ends of the ridge.
Straight RakePiece that forms the edge lines of the gable, with a lace system specially designed for curved tile covers and S tile.
Universal rakeUniversal piece that, placed above the tile, allows finishing the edge lines of the gable.
Eave Roof TileCover tile with the same dimensions as a ridge tile but with a pre-cut to avoid having to cut the tiles on site and with a hole to allow mechanical fixing with a screw to the support board.
BirdstopCeramic piece that lifts the tile of the first row of the skirt so that it has the same slope as the tiles of the rest of the skirt, filling the gap between the tile and the support board.
Hip StarterPiece that allows to finish off the hip in the encounter with the eaves.
LollipopDecorative piece for the roof.
Available in two sizes: 38 and 31 cm high.
Four-way RidgePiece that resolves the encounter of four HIP.
Ventilation Roof TileCeramic piece that avoids the possible condensations in the undercover.
Three-way RidgePiece that resolves the meeting of the ridge with two HIP.
ChimneyPiece designed to solve the exit of the ventilation ducts in the roof.
Our
projects
Single Family Home
Hotel Spa “A Quinta da Auga”
A Casa do Taberneiro
Guesthouse San Anton
Basilic of Santa María la Mayor de Linares
Berbes 41
Technical sheet
Galicia Calidade
Performance CE
NOA Miami-Dade
Warranty